BC245XLT Uniden Bearcat Remote Control Software For the PalmOS
FREE to download
CLICK HERE TO DOWNLOAD A FREE COPY
All of the best features of the original ScanPro245 software
have been converted for the PalmOS.
Connecting Your Scanner
To use this software you must be able to connect
your PalmOS device to your scanners 9 pin serial port.
Below are some common connectors if you do not have one
Palm V handheld 9-pin serial port cable
Palm III or VII 9-pin serial port cable
Palm m100 cable
Compatibility
The software should work on any of the following and
possibly other PalmOS devices running 3.1 or preferably
3.5 or later
(assuming you have
the correct serial port adapter for the device)
The program requires approximately 498k Unless you
are already running the Booster program, then only 100k
is needed.
Frequency Editor
Shown above. You can edit frequencies, set trunking channels,
and trunking system type here. Click
on the Status display to show the scanner mode and squelch
status anytime. Page through the entire bank to edit any
frequency.
Monitor
The Monitor feature allows you to see the frequency deviation
for the current channel.
Search
No longer is it such a chore to search for frequencies.
You can now easily enter the frequency range and press
one button to start.
Priority/Data Skip/Attenuation
Easily change the Priority Channel for any bank, turn data skip
on and off, set global attenuation
This software is the perfect compliment to the full ScanPro245
software allowing you to easily make changes to your
scanner on the go or stick with your PalmOS full time, anywhere.
This software is not available elsewhere, it is distributed EXCLUSIVELY
from this website and our listings on ebay.
For other Uniden and Radio Shack scanner Software see
blackbagsoftware.com
Click Here for Screen Shots
